Skip to content

Nozzles and collets "made of material"

Yencoly 46-piece WP-9/20/25 kit

A 46-piece kit for the smaller torch family, on a listing that says its parts are "made of material", calls TIG consumables essential to a cutting project, and carries five empty bullets.

Yencoly 46-piece TIG torch consumable kit with nozzles and collets

Yencoly 46-piece WP-9/20/25 kit

A 46-piece kit for the smaller torch family, on a listing that says its parts are "made of material", calls TIG consumables essential to a cutting project, and carries five empty bullets.

Amazon reference
B081QLXCNG
EAN
0738585172521
  • Names the three torch series it fits — WP-9, WP-20 and WP-25
  • Forty-six pieces across nozzles and collets, which is a working stock rather than a top-up
  • The material bullet reads that "Nozzles and collets are made of material, and professional technology process"

Best for: A WP-9, 20 or 25 torch, if the piece breakdown can be established before ordering

≈ $35
Check price on Amazon

Specifications

Amazon reference
B081QLXCNG
EAN
0738585172521

A forty-six piece set of nozzles and collets for the WP-9, 20 and 25 torches is a reasonable thing to buy: those three series share a front end, the parts are small and easily lost, and buying them one at a time costs more than buying them together. The listing says as much, and it names the three series, which is the compatibility question this shelf turns on.

Everything else on the page has been assembled rather than written. The material bullet reads that “Nozzles and collets are made of material, and professional technology process”. Two bullets describe TIG consumables as essential to a cutting project and talk about replacing broken parts “during the cutting process”, on a kit that has nothing to do with plasma or oxy-fuel. The performance bullet is the same pasted paragraph about plasticity and low-temperature impact toughness that appears on two more kits on this shelf and on one on the torch parts shelf — it describes a filler metal. Five further bullets are empty.

What that leaves is a count. Forty-six pieces, no breakdown, no sizes, no part numbers — and a collet is selected by tungsten diameter and nothing else. On this shelf, two kits itemize every piece they contain against a published part number. This is not one of them.

Availability

Read on the day this page was built: $35 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.

The questions welders ask

What is actually in it?

The listing does not say. Forty-six pieces are claimed across nozzles and collets, with no quantity per type, no sizes and no part numbers — and collets are chosen by tungsten diameter and nothing else, so without sizes there is no way to know whether the kit covers the electrode you use. Two kits on this shelf, at 63 and 68 pieces, itemize every piece by part number.

Is it a welding kit or a cutting kit?

Welding. The title names three TIG torch series and the parts are TIG parts. Two bullets nonetheless describe the contents as "essential to cutting project" and refer to replacing broken ones "during the cutting process". The same phrasing, and the same "made of material" sentence, appears on a kit on the torch parts shelf of this site — it is pasted copy that has traveled between listings rather than a statement about this product.

More tig consumables

  • Zinger stubby gas lens kit with glass cups for a TIG torch

    Zinger 53-piece stubby gas lens kit, WP-17/18/26

    The only kit on this shelf built around stubby gas lenses and glass cups — with every piece itemized by part number in the description.

    Amazon reference
    B07K7JC2D1
    EAN
    0782289656498
    • Stubby gas lenses in four tungsten sizes — 0.040 in, 1/16, 3/32 and 1/8 — which no other kit here offers
    • Six #10 glass cups, so the puddle can actually be seen
    • Claims an electrical conductivity "similar with 2% thoriated tungsten electrode" on a kit containing no tungsten

    Best for: Getting into a tight joint on a big torch, where a short back cap and a stubby lens are the only way in

    ≈ $28
    Check price on Amazon
  • WELDINGER WL-15 gold Ø 2.4 × 175 mm, 10 pieces, product photograph

    WELDINGER WL-15 gold Ø 2.4 × 175 mm, 10 pieces

    Lanthanated tungsten: the modern all-rounder that works on both AC and DC, unlike the old colors.

    Type
    WL-15, lanthanated (gold)
    Diameter
    2.4 mm (0.09 in)
    Length
    175 mm (6.89 in)
    Quantity
    10 pieces
    Amazon reference
    B08WJ3LPHX
    EAN
    4251314269072
    • Works on both AC and DC, so one box covers steel, stainless and aluminum
    • Not radioactive, unlike the thoriated (red) tungstens it replaces
    • Not sold on the American or British stores at the time of checking

    Best for: One tungsten type for a workshop that welds steel one day and aluminum the next

    Search Amazon for this model
  • GYS Steel TIG rods Ø 1.6 × 330 mm, product photograph

    GYS Steel TIG rods Ø 1.6 × 330 mm

    Nine euros of steel filler — the cheapest thing on the European half of this site, and the one that decides how a bead looks.

    Material
    Steel
    Diameter
    1.6 mm (0.06 in)
    Length
    330 mm (13 in)
    Amazon reference
    B00IWO3HY2
    EAN
    3154020087224
    • €9 — the cheapest consumable on the European half of this site
    • 1.6 mm (0.06 in) suits thin steel and stainless work, where most TIG beginners start
    • Steel rods rust: a damp tube is a wasted packet

    Best for: Thin steel and stainless TIG, and for practicing the feed

    Search Amazon for this model

Elsewhere in the workroom

  • Miller Classic Series welding helmet with a digital control panel inside

    Miller 287803

    A small window and a published switching time, from the only listing on this shelf that states the amperage it works down to.

    Amazon reference
    B096D7RCSH
    EAN
    0715959681254
    • States the current it works down to — five amps or below, which no other listing on this shelf does
    • Publishes a switching time, 1/23,000 second, and a sensor count
    • Six square inches is the smallest window on this shelf

    Best for: Low-amperage TIG, where the lens has to darken on an arc a big sensor set would miss

    ≈ $135
    Check price on Amazon
  • Miller Digital Elite welding helmet with a large ClearLight 4X lens

    Miller 296765

    Four named technologies, a three-word product description, and not one measurable figure on the page.

    Amazon reference
    B0D98RSGH3
    EAN
    0715959710992
    • Electromagnetic arc sensing, stated to detect the arc even when the sensors are blocked and to ignore sunlight
    • Four independent arc sensors as well
    • No viewing area, no shade range, no switching time and no optical class published anywhere on the listing

    Best for: Outdoor and confined-space work, where a cartridge that senses the arc electromagnetically earns its price

    ≈ $355
    Check price on Amazon
  • YESWELDER auto-darkening welding helmet with a true-color lens

    YESWELDER LYG-L600A

    The cheapest helmet in the American half of this hub, and it publishes the four digits this shelf's buying tip tells you to read.

    Amazon reference
    B07QJ1Y527
    EAN
    0768563619779
    • Publishes 1/1/1/1 — the best available optical class, and the figure no European helmet on this shelf states
    • Publishes a switching time, 1/30,000 second, and a sensor count
    • A 3.64 by 1.67 in window is 6.1 square inches — the smallest on this shelf bar one

    Best for: A first auto-darkening helmet bought on the optical class rather than on the shell

    ≈ $40
    Check price on Amazon

All tig consumables