The air the workshop runs on · review
A six-gallon pancake that publishes what the hub asks for — 2.6 SCFM at 90 PSI — and its own weight at 30.8 lb.
Where we come out The one small compressor on this shelf that publishes its delivery at a stated pressure — 2.6 SCFM at 90 PSI, which is a nail gun and not a grinder.
A pancake compressor is bought to be carried, and this one publishes both numbers that matter for that: 30.8 lb on the handle, and 2.6 SCFM delivered at 90 PSI. The second figure is the one this hub’s buying tip is about — delivery at a working pressure rather than the displacement a pump sweeps — and three of the four compressors in the American half of this shelf give it.
What 2.6 SCFM buys is the intermittent half of a workshop. Nailers, staplers, tires, blow guns and dusters all draw in bursts, and a six-gallon tank at 150 PSI carries enough between them for the pump to keep up. The 150 PSI ceiling is worth having for exactly that reason: the usable air in a tank is what lies between the cut-out pressure and what the tool needs, so a higher ceiling in the same tank is more usable air.
What it will not do is run anything continuous. A die grinder asks for 4 to 6 SCFM without pause, a plasma torch 3 to 5, a blast cabinet more again — and this machine would run without stopping and still fall behind. Nothing on the page says so, and nothing needs to: the figure says it. The two omissions worth noting are a noise rating, on a tool that is among the loudest in a garage, and a duty cycle.
Read on the day this page was built: $160 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.
| Amazon reference | B0DKFBFJGN |
|---|---|
| EAN | 0810941034305 |
Intermittent tools comfortably and continuous ones not at all. A framing or brad nailer uses a fraction of a cubic foot per shot, so 2.6 SCFM is plenty; a tire inflator and a blow gun are the same. A die grinder wants 4 to 6 SCFM without pause, a plasma torch 3 to 5, a blast cabinet 10 or more — all of which this machine would chase and never catch. The figure is the honest answer to the question, which is why this hub asks for it.
It stores more air in the same tank. Six gallons at 150 PSI holds roughly twenty per cent more usable air than six gallons at 125, because what you actually use is the air between the cut-out pressure and the pressure your tool needs. On a small tank that extra margin is the difference between finishing a run of nails and waiting for the pump.
Because a pancake compressor is carried. At 30.8 lb this one is a one-handed lift for most people and a two-handed one up a ladder, and it is the only compressor on this shelf to state the figure. The 80-gallon machine further up this page weighs 244 kg (537.9 lb) in the box; between those two numbers lies the whole difference in how the two are used.
Same shelf, nearest price — what else that money puts on the bench.
Details checked on October 7, 2026.
Nail guns, tires and intermittent air work in a garage, where portability matters more than volume
Amazon reports what buyers took in the month before this page was last checked: at least 600.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Specifications: the manufacturer sheet for welding and metalworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
80 gal ASME · 5 HP 230 V · 18.4/17.2/16.4 CFM at 40/90/175 PSI · 15,000 h
A two-stage commercial compressor that publishes its delivery at three pressures — which is exactly what this hub’s buying tip asks for and almost nothing on the market does.
Best for: A workshop running a plasma cutter, a blast cabinet or air tools continuously, with a 230 V single-phase supply
≈ $3470
2 gal · 1/3 HP · 125 PSI max · 10-piece accessory kit · no CFM published
A two-gallon oil-free portable whose listing is a single bullet — the accessory list — with no air delivery figure anywhere on the page.
Best for: Tires, blowing down a workbench and a staple gun — not for any air tool that runs continuously
≈ $140
30 gal · 14 CFM at 90 PSI · 175 PSI · 5,000 W · 200 A welder · Honda GX390
A petrol-engined machine that is a 14 CFM compressor, a 5,000 W generator and a 180 A DC stick welder at once — for a truck bed with no mains supply.
Best for: Site and roadside work with no electricity, where one engine has to do three jobs
≈ $6800
