Abrasive or cold cut · review
A site machine from a brand with a spares chain — and a listing that publishes almost nothing else.
Where we come out A good machine sold by a listing that tells you nothing. Buy it for the badge and the spares, not for the sheet.
Manufacturer, model, part number D28715-QS, 2,200 W, and a reference that resolves on all six Amazon stores — the only chop saw in this batch that does. For a tool bought by people who work in more than one country, that is worth something.
No cut capacity, no vice description, no mitre range, no weight. Machines at half the price on this page publish all four. We leave the fields empty rather than borrow figures from a similar model, and this paragraph is here so the gap is visible rather than silent.
Every figure above comes from the manufacturer’s published specification for this reference. Fields the listing does not publish are left out rather than estimated. Market availability was verified per market on the EAN.
| Power | 2,200 W |
|---|---|
| Disc diameter | 355 mm (14 in) |
| Part number | D28715-QS |
| Amazon reference | B0013LECYA |
| EAN | 5035048166789 |
Because the Amazon listing carries almost nothing — power and voltage, repeated. DEWALT publishes a full sheet for the D28715 elsewhere, and we do not restate figures we cannot source from the listing or from documentation for this exact reference. What is verified here is the manufacturer, the model, the part number and the availability on six markets.
On what is published, no — and that is the honest answer rather than a hedge. If you buy it, buy it for the service network and the site-tool build, both of which are real and neither of which appears as a number. If you want a specification to compare, the metabo publishes one.
7.8/ 10
A good machine sold by a listing that tells you nothing. Buy it for the badge and the spares, not for the sheet.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on August 13, 2026.
A contractor who needs the machine repaired locally rather than replaced
Specifications: the manufacturer sheet for welding and metalworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
2,200 W · 355 mm (14 in) TCT cold cut · mitre ±46° · €880
A carbide blade instead of an abrasive disc: no sparks, no burr, and an end you can weld without dressing.
Best for: Daily fabrication where every cut would otherwise be dressed by hand
2,300 W · 355 mm (14 in) · mitre −15° to 45° · €120
The cheapest way to cut steel section square, and the loudest tool in this batch by a distance.
Best for: Cutting stock to length in a workshop where the noise is nobody else’s problem
355 mm (14 in) · quick-clamp vice · mitre −15° to 45° · €180
A quick-clamp vice with continuous mitre adjustment — the vice is what decides whether the cut is square.
Best for: Repeated cuts on tube and box section, where a slipping vice ruins the angle
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
