DEWALT D28715
2,200 W · 355 mm (14 in) · €341
A site machine from a brand with a spares chain — and a listing that publishes almost nothing else.
Best for: A contractor who needs the machine repaired locally rather than replaced
Abrasive or cold cut · review
metabo CS 22-355 review
A quick-clamp vice with continuous mitre adjustment — the vice is what decides whether the cut is square.
Where we come out The vice and the mitre range are the €60, and on tube they earn it.
What you are paying for
Not power — the Güde above it claims more watts. What this adds is a vice designed to hold awkward sections and a mitre adjustment that moves continuously rather than clicking between presets. On a saw, both of those are accuracy features.
Round tube is the test
Square stock clamps itself. Round tube rolls, and if it rolls the cut face comes out elliptical and out of square — visible immediately when you try to weld two ends together. A vice with a quick action and firm final clamp is what stops that, and it is the reason to spend above the entry level in this category.
Sources
Every figure above comes from the manufacturer’s published specification for this reference. Fields the listing does not publish are left out rather than estimated. Market availability was verified per market on the EAN.
What it handles, and what it will not
Strengths
- The vice adjusts continuously rather than in steps, so odd sections still clamp tight
- Named for profiles, tube and bar rather than a vague « metal »
- Metabo spares and service across Europe
Compromises
- €60 more than the Güde for a similar cutting principle
- Still abrasive: same sparks, same burr, same noise
- Not sold on the American store at the time of checking
Specifications
| Disc diameter | 355 mm (14 in) |
|---|---|
| Vice | Quick-clamp, continuously adjustable |
| Mitre range | −15° to 45°, continuous |
| Materials named by the maker | Steel, non-ferrous metals, iron — profiles, tube and bar |
| Amazon reference | B0C37GV5N4 |
| EAN | 4061792211773 |
The questions welders ask
Why does the vice matter more than the motor?
Because everything downstream depends on the work not moving. Round tube is the hard case: it wants to roll under the disc, and a vice that lets it turn a degree gives you a cut face you will have to grind flat before it will weld. A quick-clamp vice that closes firmly on odd sections is what separates a saw you trust from one you fight.
Is continuous mitre adjustment useful?
On anything but 45° and 90°, yes. Detented saws give you the two common angles and nothing between; a frame with a five-sided corner or a brace at 30° needs the range. It also lets you correct: if a test cut comes out half a degree off, you can move it half a degree.
Our score
7.2/ 10
The vice and the mitre range are the €60, and on tube they earn it.
Price and availability, for welding machines
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom. Listed is not the same as in stock — availability changes daily.
Details checked on August 13, 2026.
Who this one is for, among welding machines
Repeated cuts on tube and box section, where a slipping vice ruins the angle
This model in our welding machines guides
Sources
Specifications: the manufacturer sheet for welding and metalworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Read alongside, if you are deciding
Evolution Power Tools S355MCS
2,200 W · 355 mm (14 in) TCT cold cut · mitre ±46° · €880
A carbide blade instead of an abrasive disc: no sparks, no burr, and an end you can weld without dressing.
Best for: Daily fabrication where every cut would otherwise be dressed by hand
Güde GMT 355-2300
2,300 W · 355 mm (14 in) · mitre −15° to 45° · €120
The cheapest way to cut steel section square, and the loudest tool in this batch by a distance.
Best for: Cutting stock to length in a workshop where the noise is nobody else’s problem
Prices quoted in these summaries are dated readings. The live price is shown next to each product.