Making parts, not just joining them · review
A 12-volt mini drilling and milling machine with a belt drive and no plastic in the body — and a listing that publishes not one dimension or speed.
Where we come out The same class of 12-volt mini mill as its better-documented twin on this shelf, on a page that publishes a voltage and nothing else.
This is a 12-volt bench mill-drill of the model-engineering class, and almost everything that can be said about it comes from three sentences of construction: a 12 V DC transformer drives it, the body has no plastic parts, a belt carries the drive, and a clamping vice is built into the base.
Those are real points. A belt between motor and spindle slips when a cutter jams, which on a small machine with no stated overload protection is the thing that saves the motor; an all-metal body is stiffer than a cast plastic one; and a vice built in rather than bolted on is one less thing to align. The listing also tells you to slow down on harder material and to wear goggles, which is more than some machines here manage.
What it does not publish is any number at all beyond the voltage. No power rating, no spindle speed, no axis travel, no vice capacity, no collet range, no handle resolution and no runout. The JARYANNIX machine on this shelf, at ten dollars more, publishes every one of those — and its reference, FT-028371, shares the digits 028371 with this listing’s T028371FBA. What that means about who made either is not something either page says.
Read on the day this page was built: $199 at the American Amazon shop.
Read from Keepa on the day this page was last revised; stock and price both move without notice.
Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.
| Amazon reference | B0DHZBT19K |
|---|---|
| EAN | 0840403705528 |
The two listings describe the same kind of machine and only one of them tells you anything. JARYANNIX publishes a full table: 24 W, a 3,000 rpm spindle, a spindle jump under 0.1 mm (0.004 in), X travel of 45 mm (1.77 in), Y and Z of 35 mm (1.38 in), a 50 by 60 mm (2.36 in) vice, collets from 1 to 6 mm (0.04 to 0.24 in) and a 0.05 mm (0.002 in) handle scale. This listing publishes a voltage and three sentences about construction. Their references share the digits 028371.
Yes, for one reason the listing gives and one it does not. The stated reasons are smoothness, low noise and easy maintenance. The unstated one matters more: a belt slips when the cutter jams, where a direct-drive motor stalls and heats. On a 12 V machine with no overload protection mentioned, that slip is the protection.
Same shelf, nearest price — what else that money puts on the bench.
Details checked on October 7, 2026.
The same model work as its twin, if the price is lower on the day
Specifications: the manufacturer sheet for welding and metalworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
12 V DC · lathe and mill in one · tool-height shims · soft metals only
A 12-volt combination mini lathe and mill that supplies shims to set the tool height — the one adjustment that decides whether a small lathe cuts or rubs.
Best for: Teaching turning and milling on one machine, in wood, plastic and pure copper or aluminum
≈ $235
36 W · 20,000 rpm motor · 3,000 rpm spindle · 0.1 mm (0.004 in)/division
The 36-watt version of the XENDOLL desktop mill, with the same spindle speed, the same handle scale and the same bullets as the 24-watt one.
Best for: The same model and STEM work as the 24 W machine, with half again the motor
≈ $200
7 in swing · 14 in centers · 2,500 rpm variable · reversible · DRO
The only real metal lathe in the American half of this hub — 7 by 14 inches, variable to 2,500 rpm, reversible for left-hand threads, with a digital readout and a cutter kit.
Best for: Turning steel parts on a bench, where the tooling has to come with the machine
≈ $510
