Shears, brakes & spot welders · review
Nineteen euros more than the 125 mm (4.92 in) for a blade three-quarters longer — the better buy of the pair.
Where we come out The one to take of the pair: more blade, barely more money.
On a lever shear, everything else is a frame. Two hundred millimeters covers most hand-sized work in a single stroke — which is the difference between a clean edge and one with a visible step every 125 mm (4.92 in).
Thickness capacity, in any material. That is the figure that matters most, and neither Wiltec listing gives it.
Every figure above comes from the manufacturer’s published specification for this reference. Fields the listing does not publish are left out rather than estimated. Market availability was verified per market on the EAN.
| Blade length | 200 mm (7.87 in) |
|---|---|
| Type | Manual lever shear |
| Materials named by the maker | Metal and sheet |
| Amazon reference | B07SNDD91J |
| EAN | 4251548109274 |
The 200 mm (7.87 in), unless bench space is genuinely the constraint. Nineteen euros buys 75 mm (2.95 in) more blade, and blade length is exactly what decides whether a cut is one clean stroke or three with steps between them. There is no job the shorter one does better.
Cautiously, and thinner than mild steel. Stainless work-hardens and is stronger, so a shear rated for a given thickness in mild steel will take roughly two thirds of that in stainless — and forcing it is how blades chip. Since no thickness is published here at all, treat stainless as a test-piece question before committing.
7.2/ 10
The one to take of the pair: more blade, barely more money.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom. Listed is not the same as in stock — availability changes daily.
Details checked on August 13, 2026.
General workshop sheet trimming where the pieces are hand-sized
Specifications: the manufacturer sheet for welding and metalworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
500 mm (19.7 in) blade · bench-fixed · 1.5 mm (0.06 in) test cut · €189
Half a meter of blade — the first machine here that cuts a panel edge in one stroke.
Best for: Panel work: cutting sheet to size cleanly, in one pull
20 coupons · 2 × 4 in · 11 GA / 3.05 mm (0.12 in) mild steel
Twenty pieces of 3 mm (0.12 in) mild steel cut to the same size — the cheapest way to learn a weld without ruining the thing you meant to make.
Best for: Learning a process, setting a machine, or proving a parameter before it touches real work
≈ $30
A36 cold rolled · 16 GA / 1.52 mm (0.06 in) · 36 × 24 in · made in USA
A named steel grade at a published thickness, in a sheet big enough to cut a bracket from — and the only item in this hub that states what the metal actually is.
Best for: Brackets, repair plates and shop fixtures, where the grade and the gauge both have to be known
≈ $60
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
