Skip to content

Says plainly that its key specs are easy to verify

PGN Bearings ZY-GHM-0902-06, ER70S-6, 0.035 in, 10 lb

The coarsest of three PGN wires on this shelf, on a listing whose fourth bullet exists purely to state the diameter and the weight clearly.

PGN ER70S-6 solid MIG welding wire, 0.035 inch, on a ten-pound spool

PGN Bearings ZY-GHM-0902-06, ER70S-6, 0.035 in, 10 lb

The coarsest of three PGN wires on this shelf, on a listing whose fourth bullet exists purely to state the diameter and the weight clearly.

Amazon reference
B07XFFZX3V
EAN
0760655001301
  • One of three diameters of the same wire on this shelf — .023, .030 and .035 in — so the range covers sheet to section
  • A bullet devoted to stating the diameter and spool weight plainly, "making the key specifications easy to verify before ordering"
  • Carries a different reference format from the maker’s own .023 in and .030 in wires — ZY-GHM-0902-06 against WW-ER70S6-nnn-10LB

Best for: Heavier fabrication, bought from a maker that offers the same wire in three diameters

≈ $33
Check price on Amazon

Specifications

Amazon reference
B07XFFZX3V
EAN
0760655001301

There is a bullet on this listing whose entire purpose is to state the diameter and the spool weight clearly: “.035 INCH, 10LB SPOOL: Supplied in a .035-inch diameter and 10 pound spool format, making the key specifications easy to verify before ordering.” On a shelf where one wire buries its weight in the last line of the description and another gives none at all, a seller who thinks the specification is worth a bullet of its own is doing something right.

The rest is ordinary and correctly argued. ER70S-6 with high silicon and manganese deoxidisers, which is what the classification means and what lets the wire cope with less-than-clean steel; the joint types it suits; and a claim about careful packing to prevent tangles, which is the failure that turns a ten-pound spool into five pounds of use and a bird’s nest.

Two things are worth noting rather than judging. This wire’s reference is ZY-GHM-0902-06, while the same maker’s .023 in and .030 in wires on this shelf are WW-ER70S6-023-10LB and WW-ER70S6-030-10LB — one product line, two numbering systems. And the ZY-GHM prefix also opens a YESWELDER reference on this shelf. Neither fact tells you anything about the wire; both are visible on the page.

Availability

Read on the day this page was built: $33 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.

The questions welders ask

Which PGN wire should I buy?

Whichever diameter matches your thinnest metal, which is what this hub’s buying tip says. PGN offers the same ER70S-6 in .023 in for car-body sheet, .030 in as the general-purpose size, and .035 in for thicker section — all on ten-pound spools. The .023 and .030 wires carry references in the form WW-ER70S6-023-10LB and WW-ER70S6-030-10LB; this one is ZY-GHM-0902-06, which is a different numbering system for the same product line.

Is the reference worth noticing?

It is a fact worth recording rather than interpreting. Two of the three PGN wires on this shelf use a reference that spells out the classification, the diameter and the weight; this one uses a code beginning ZY-GHM. A YESWELDER wire on the same shelf carries the reference ZY-GHM-DYYL-2-319. Shared reference prefixes across brands are common in this trade and mean nothing in themselves about who made what — but on a shelf where seven wires share one classification, it is the kind of detail a buyer may want to know they are looking at.

More mig wire

  • VEVOR ER70S-6 MIG welding wire, 0.035 inch, on an eleven-pound spool

    VEVOR ER70S-6, 0.035 in, 11 lb

    The coarser of the two VEVOR wires on this shelf, in the larger spool — and the one whose listing drops the tensile figure its own stablemate publishes.

    Amazon reference
    B0CGCXKFQ2
    EAN
    0840349946337
    • Eleven pounds rather than ten, for a small increase over the brand’s 0.030 in spool
    • States the deoxidiser argument — higher manganese and silicon for dirty, oily or rusted steel
    • Does not publish the 490 MPa tensile figure that the same maker’s 0.030 in listing gives

    Best for: Thicker section and structural work, where 0.035 in lays metal faster than 0.030

    ≈ $27
    Check price on Amazon
  • VEVOR ER70S-6 solid MIG welding wire on a ten-pound spool

    VEVOR ER70S-6, 0.030 in, 10 lb

    The only listing on this shelf that puts a number on the weld rather than on the spool — a stated tensile strength of 490 MPa or better.

    Amazon reference
    B0GCDRL8V4
    EAN
    0197988178002
    • Publishes a tensile strength — at least 490 MPa — which no other wire in this hub states
    • Names both shielding gas options: 100 per cent CO2, or 80 per cent argon with 20 per cent CO2
    • A ten-pound spool where two wires on this shelf give eleven for less

    Best for: General fabrication where the deposit strength matters and the gas is already decided

    ≈ $25
    Check price on Amazon
  • YESWELDER ER70S-6 copper-coated solid MIG wire on a ten-pound spool

    YESWELDER ZY-GHM-DYYL-2-319, ER70S-6, 0.030 in, 10 lb

    The only wire on this shelf whose listing states that it is copper coated — which is the property that decides whether it still feeds smoothly at the end of the spool.

    Amazon reference
    B07W3KR4XR
    EAN
    0658848701629
    • States that the wire is copper coated, which no other listing on this shelf does
    • Names both shielding gas options and explains the consequence: higher currents are possible with 100 per cent CO2
    • No tensile figure, where one wire on this shelf publishes 490 MPa

    Best for: A machine that runs 100 per cent CO2 at higher currents on sheet without burning through

    ≈ $36
    Check price on Amazon

Elsewhere in the workroom

  • Spurtar Welding magnets, 6 × 13 kg, product photograph

    Spurtar Welding magnets, 6 × 13 kg

    Six magnets for €20: they hold a corner square while you tack, and they are not clamps.

    Quantity
    6 magnets
    Hold
    13 kg (28.7 lb) each
    Angles
    45°, 90° and 135°
    Amazon reference
    B08GR33SXH
    EAN
    0696177836667
    • Six magnets means both ends of two joints held at once
    • Three angles cover square corners, mitres and obtuse bracing
    • Magnets hold for tacking and cannot resist a cooling weld

    Best for: Holding a frame square long enough to tack it

    Search Amazon for this model
  • Sägeband-Manufaktur M42 1620 × 13 × 0.65, 8/12 TPI, 5-pack, product photograph

    Sägeband-Manufaktur M42 1620 × 13 × 0.65, 8/12 TPI, 5-pack

    Eight to twelve teeth: the middle pitch, and the one to fit if you only ever fit one.

    Type
    Premium M42 HSS bi-metal
    Dimensions
    1620 × 13 × 0.65 mm (63.8 × 0.51 × 0.03 in)
    Pitch
    8/12 TPI, variable
    Quantity
    5 blades
    Amazon reference
    B0G49MVZB4
    EAN
    4251413669353
    • The compromise pitch: acceptable on both tube and moderate solid stock
    • Five blades, so the saw is never waiting for a delivery
    • A compromise is worse than the right pitch at either extreme

    Best for: A workshop that cuts mixed stock and does not want to change blades constantly

    Check price on Amazon
  • STAHLWERK Bullet 3-in-1 True Colour, product photograph

    STAHLWERK Bullet 3-in-1 True Colour

    The middle of STAHLWERK’s range: the same True Color idea in a shell built to be worn all day.

    Type
    Auto-darkening, True Color
    Processes
    MIG/MAG, TIG and MMA
    Amazon reference
    B0DQ37M379
    EAN
    4262452493502
    • Same True Color lens as the cheaper Worker, in a better shell
    • Rated for the three processes this site covers
    • Not sold on the American or British stores at the time of checking

    Best for: Regular welding sessions where helmet comfort starts to matter

    Search Amazon for this model

All mig wire