Skip to content

The arithmetic adds up: 20 + 20 + 5 + 5

bestarc AG60P-50-BOX

Fifty plasma consumables itemized piece by piece, for the AG-60 and SG-55 torch patterns — the first plasma parts on this shelf.

Bestarc AG60P plasma consumable kit with nozzles and electrodes in a case

bestarc AG60P-50-BOX

Fifty plasma consumables itemized piece by piece, for the AG-60 and SG-55 torch patterns — the first plasma parts on this shelf.

Amazon reference
B0D2L8DPKL
EAN
0727431700773
  • Itemizes all fifty pieces — 20 nozzles, 20 electrodes, 5 shield cups, 5 wire guides — and the total is right
  • Names five torch patterns it fits: AG-60, AG-60P, SG-55, WSD-60 and the BTC500DP head
  • No current rating on the nozzles — a plasma nozzle is sized by amperage, and the figure is absent

Best for: An AG-60 or SG-55 plasma torch, stocked for a season rather than a job

≈ $33
Check price on Amazon

Specifications

Amazon reference
B0D2L8DPKL
EAN
0727431700773

This is the first plasma consumable set on this shelf, and it does the simplest thing well: it says what is in the box. Twenty nozzles, twenty electrodes, five shield cups, five wire guides. Add them up and you get fifty, which is the number in the title — a test that one listing on this site fails and several do not attempt.

The pairing is right too. Nozzles and electrodes wear together in an air plasma torch: the electrode erodes at the center, the nozzle bore opens, and fitting a fresh nozzle behind a worn electrode ruins it within minutes because the arc no longer starts on the axis. Twenty of each means they get changed in pairs, which is what the manual says and what a kit of five nozzles and one electrode makes impossible.

Compatibility is given as five patterns — AG-60, AG-60P, SG-55, WSD-60 and the BTC500DP head — which covers most of the Chinese-pattern air plasma torches sold with inverter cutters, and then undercut by a closing claim to fit “most plasma cutter”. What is not published is the one figure that matters: the amperage band the nozzles are bored for. A 40 A nozzle run at 60 A does not last, and nothing on the page says which these are.

Availability

Read on the day this page was built: $33 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

Prices quoted in this text were read on 2026-10-07. The live price is at the top of the page.

The questions welders ask

Why are nozzles and electrodes supplied in equal numbers?

Because they wear as a pair. In an air plasma torch the electrode erodes a pit at its center and the nozzle bore opens up, and running a new nozzle with a worn electrode destroys the new nozzle quickly — the arc wanders off center and eats the bore. Twenty of each means they can be changed together, which is what the manuals tell you to do and what most people do not, because they only have one of one of them.

What is missing before I can buy with confidence?

The current rating. A plasma nozzle has an orifice sized for an amperage band — a 40 A nozzle run at 60 A burns out, and a 60 A nozzle at 30 A gives a ragged cut. The listing names torch patterns but no amperage for the nozzles, and says nothing about the electrode tip material, where the hafnium insert is what determines how many starts it survives. Check the orifice size against your machine’s manual before committing to fifty of anything.

More torch parts

  • OKBA replacement MIG welding gun for Lincoln Magnum 100L with cable

    OKBA Magnum 100L replacement torch, 100 A, 10 ft

    A complete 100-amp MIG gun with three meters of cable, on a shelf of consumables — and a listing whose own reference reads "Contact Tips-035".

    Amazon reference
    B09NKC5MS5
    EAN
    0752771083873
    • Replaces the whole gun, which is the answer when the neck, the liner or the cable is the fault rather than the tip
    • Names the machines it fits in detail — SP-140T, SP-180T, MIG Pak 140 and 180, Pro-MIG 140 to 180, Weld-Pak 125 to 140HD, Power MIG 140T to 180T, Easy-Core 140 and 180
    • The manufacturer reference on the page reads "Contact Tips-035", which is a consumable, not a gun

    Best for: A Lincoln or YESWELDER machine whose gun has been damaged beyond the consumables

    ≈ $55
    Check price on Amazon
  • YESWELDER MIG gun consumable kit with contact tips, nozzles and diffusers

    YESWELDER YW-100L-0.8

    Twenty contact tips in one box for the commonest small MIG torch pattern in America — which is the quantity this hub’s buying tip actually asks for.

    Amazon reference
    B07QWJG9JB
    EAN
    0768563619809
    • Twenty tips in one purchase, which is the only way the advice above becomes practical
    • Names the torch patterns it fits — Lincoln Magnum 100L, K530 series, Tweco Mini and #1
    • One wire size only — 0.030 in, 0.8 mm — so a change of wire means a different kit

    Best for: A Lincoln Magnum 100L or Tweco Mini torch running 0.030 in wire, stocked properly

    ≈ $17
    Check price on Amazon
  • Five STARTECHWELD 45V43 TIG gas lens collet bodies

    STARTECHWELD ST-45V43

    A five-pack of gas lens bodies that publishes the collet series and the cup range it works with — which is how TIG consumables are actually identified.

    Amazon reference
    B09CMTS9TZ
    EAN
    0818988015370
    • Publishes the part number, the tungsten size, the torch series, the collet series and the cup range
    • A gas lens rather than a plain collet body, which gives laminar shielding gas instead of turbulent
    • One tungsten size only: 1/16 in, so 0.040 in or 3/32 in work needs a different body

    Best for: A WP-9, 20 or 25 torch running 1/16 in tungsten, where gas coverage matters more than anything else

    ≈ $22
    Check price on Amazon

Elsewhere in the workroom

  • YESWELDER auto-darkening welding helmet with a true-color lens

    YESWELDER LYG-L600A

    The cheapest helmet in the American half of this hub, and it publishes the four digits this shelf's buying tip tells you to read.

    Amazon reference
    B07QJ1Y527
    EAN
    0768563619779
    • Publishes 1/1/1/1 — the best available optical class, and the figure no European helmet on this shelf states
    • Publishes a switching time, 1/30,000 second, and a sensor count
    • A 3.64 by 1.67 in window is 6.1 square inches — the smallest on this shelf bar one

    Best for: A first auto-darkening helmet bought on the optical class rather than on the shell

    ≈ $40
    Check price on Amazon
  • WELDINGER Universal assortment 2.0 / 2.5 / 3.25 mm, product photograph

    WELDINGER Universal assortment 2.0 / 2.5 / 3.25 mm

    Three diameters in one box, which is how you find out what your machine and your steel actually want.

    Diameters
    2.0, 2.5 and 3.25 mm (0.13 in)
    Type
    Universal, suitable for galvanized steel per the maker
    Amazon reference
    B07HNYR99D
    EAN
    4251314224927
    • Three diameters, so you can match the rod to the plate instead of the other way round
    • €16 makes it a sensible first purchase alongside a machine
    • Assortments give you small quantities of each — a real job will exhaust one size

    Best for: A first box, bought with a first stick welder, to learn what each size does

    Search Amazon for this model
  • YESWELDER large-view welding helmet with a wide true-color window

    YESWELDER LYG-M800H

    Two and a half times the glass of its cheaper stablemate, with four arc sensors instead of two — and the same published optical class.

    Amazon reference
    B07M5WKCYX
    EAN
    0768563619526
    • 3.93 by 3.66 in — about 14 square inches, the second largest window on this shelf
    • Publishes 1/1/1/1 optical class, a 1/30,000 second switching time and four arc sensors
    • No trigger current stated, so low-amp TIG detection is still unproven on the page

    Best for: Following a long seam or welding in an awkward position, where a small window means moving your head

    ≈ $60
    Check price on Amazon

All torch parts