Slow, square, quiet · review
A band saw you can lift off its table and carry to the work — rare in a category built around mass.
Where we come out The portable option, and the least rigid. Both follow from the same design.
Every other band saw on this page is heavy on purpose: mass is what keeps a blade tracking straight through a cut. This one gives up some of that to be liftable. That is a real capability — cutting a structure in place — bought with a real cost in rigidity on long cuts.
No maximum cut in round or square section, which is the first figure most buyers want. Machines further down this page publish theirs; this listing does not, and we do not estimate it.
Every figure above comes from the manufacturer’s published specification for this reference. Fields the listing does not publish are left out rather than estimated. Market availability was verified per market on the EAN.
| Power | 1,100 W |
|---|---|
| Table | Removable — bench or portable use |
| Cut angle | Adjustable |
| Part number | 40553 |
| Amazon reference | B08GPB7Q1H |
| EAN | 4015671405531 |
A band saw cuts cool, quietly and with almost no waste, at maybe a third of the speed. A chop saw is fast, hot and loud. If your work is repetitive stock cutting and noise is not an issue, the chop saw wins on time; if you cut indoors, near other people, or want an edge you can weld immediately, the band saw wins on everything else.
Because some cuts cannot come to the machine. A handrail already welded in place, a pipe in a plant room, a frame bolted to a floor — for those, a saw that lifts off its table and clamps to the work is the only tool that does the job without a grinder and a lot of sparks.
6.9/ 10
The portable option, and the least rigid. Both follow from the same design.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom. Listed is not the same as in stock — availability changes daily.
Details checked on August 13, 2026.
Cutting fixed structures in place — handrail, frame, pipework already installed
Here because the consumable states this machine by name.
Specifications: the manufacturer sheet for welding and metalworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
400 W · 38–80 m (125 to 262 ft)/min variable · 0–60° mitre · €329
Variable band speed and ball-bearing guides — the two things that decide whether a band saw cuts straight.
Best for: A workshop cutting both steel and aluminum, where one speed would be wrong for one of them
≈ $845
540 W · horizontal and vertical · single phase · €396
A saw that works both ways — horizontal for cutting bar to length, vertical for following a line.
Best for: A one-machine workshop that cuts bar to length and occasionally needs to follow a curve
Portable mitre band saw · variable speed · 0–60° swivel · €620
A transportable mitre band saw with a stepless speed control — precision without a factory floor.
Best for: Accurate mitres in solid bar, in a workshop that cannot house a full-size saw
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
