The first machine most people buy · review
The one professional machine on this page — and the one whose price is the same in four countries, which tells you it is not a marketplace listing.
The bottom line A professional machine at a professional price. Correct for a business, hard to justify for a hobby.
The Telmig 180/2 Turbo is the outlier here: an Italian-built, trolley-mounted, forced-air-cooled MIG from a manufacturer that has made welding equipment since 1963, at roughly €1 550.
Prices were read at €1 628 in Germany, €1 535 in France, €1 538 in Italy and €1 636 in Spain. That consistency is itself a piece of information. Marketplace listings for the same machine in different countries usually diverge wildly, because each is set by a different reseller. A spread of under 7 % across four stores is what a real distribution network looks like.
Telwin publishes a full technical sheet for this machine — current range, duty cycle at a stated temperature, thicknesses. The Amazon listing does not carry it, and we do not restate figures we cannot source from the listing or from the manufacturer’s own documentation for this exact model. What is verified here is the manufacturer, the model, the part number and the product reference on five markets. If the duty cycle is the number your decision turns on, get it from Telwin’s own sheet for reference 5758 before you buy.
Every other machine on this page carries one reference across Europe. This one does not: the British store sells it under a different ASIN. That is normal for a machine imported through separate channels, and it is the reason we verify each market rather than copy a reference from one to the others — a reference copied across a border is how a link ends up pointing at a page that does not exist.
A fabrication business, a farm workshop, a garage — anywhere the machine runs for hours and downtime has a cost. For a home workshop the honest answer is that the €330 synergic inverter earlier on this page welds the same steel, and the difference in price buys a great deal of consumables, a bottle of gas and a good helmet.
Manufacturer, model, part number and market availability come from the listing and are verified per market on the EAN. Prices were read on 13 August 2026. No current or duty cycle figure is stated here, because none is published in the listing.
Prices quoted in this text were read on 2026-08-13. The live price is at the top of the page.
| Type | Wire-fed MIG/MAG, trolley mounted, forced-air cooled |
|---|---|
| Manufacturer | Telwin S.p.A., Italy |
| Part number | 5758 |
| Amazon reference | B006FEOECU on DE, FR, IT and ES; B0043VV00Q on the British store |
| EAN | 8004897611228 |
Duty cycle, build and service, in that order. A professional transformer machine is designed to weld continuously through a working day rather than in bursts, its components are specified for that, and a European manufacturer with a service network can repair it in ten years. Whether that is worth €1 200 depends entirely on whether the machine stopping costs you money.
Almost certainly not, and we would rather say so. If you weld at weekends, the €330 synergic inverter on this page will produce the same weld on the same steel, and you can replace it twice before you reach this price. This machine earns its cost through hours, and a hobby workshop does not put in the hours.
200 A · gas and gasless · 3-in-1 · €160
A 200 A synergic machine at €160, sold under a brand with no service address — cheap for a reason we state plainly.
Best for: A one-off job where the machine only has to survive the project
≈ 160 €
160 A · 230 V single phase · Euro torch connector · €505
A French-built trolley machine with a Euro connector and a 40 W feed motor — bought for the feed quality rather than for its headline current.
Best for: Someone who intends to keep the machine ten years and wants standard consumables
≈ £690 / 505 €
160 A · 230 V · 8 kg · €176
An 8 kg three-process inverter with a seven-year manufacturer's warranty and a German importer with a published address.
Best for: A first MIG where the budget is firm and the machine must still be repairable in five years
≈ 175 €
