Skip to content

True Color · job memory

STAHLWERK Titan 3-in-1 True Colour with memory

A helmet with a memory: the shade and sensitivity you set for TIG are recalled instead of redialled.

STAHLWERK Titan 3-in-1 True Colour with memory, product photograph

STAHLWERK Titan 3-in-1 True Colour with memory

A helmet with a memory: the shade and sensitivity you set for TIG are recalled instead of redialled.

Type
Auto-darkening, True Color
Memory
Job memory for stored settings
Processes
MIG/MAG, TIG and MMA
Amazon reference
B0DQ3K4TC2
EAN
4262452493519
  • Stored settings, so switching between TIG and MIG does not mean redialling shade and sensitivity
  • True Color lens as on the cheaper models in the range
  • €90 — four times the cheapest European helmet here

Best for: A workshop that switches between processes and materials in the same session

Search Amazon for this model

Specifications

Type
Auto-darkening, True Color
Memory
Job memory for stored settings
Processes
MIG/MAG, TIG and MMA
Amazon reference
B0DQ3K4TC2
EAN
4262452493519

Settings people never change

Sensitivity and delay are set once and forgotten, usually at the factory value. A memory makes changing them worthwhile, which is the real argument: it is not that recalling is faster, it is that you start adjusting at all.

One thing to test on arrival

Set a low sensitivity and strike a low-amperage TIG arc. A cartridge that fails to trigger reliably at 20 A is a real fault, and it is the one that a job memory cannot compensate for.

Sources

Every figure above comes from the manufacturer’s published specification for this reference. Fields the listing does not publish are left out rather than estimated. Market availability was verified per market on the EAN.

The questions welders ask

What settings does a helmet actually have?

Shade number, sensitivity and delay. Shade must suit the current — roughly 9 to 10 for light MIG, 12 to 13 for high-current work. Sensitivity decides how faint an arc triggers the lens, which matters on low-amperage TIG. Delay sets how long the lens stays dark after the arc stops, so a hot pool does not flash you as it cools.

Is a memory worth €30 over the mid-range helmet?

If you switch processes often, it removes a small friction several times a day — and the alternative is leaving the helmet on a compromise setting, which is what most people do. If you weld one process at one current, it changes nothing at all.

Welders this fits

More helmets & ppe

  • STAHLWERK Worker 3-in-1 True Colour, product photograph

    STAHLWERK Worker 3-in-1 True Colour

    A True Color lens: the green cast disappears and you can see what the weld pool is actually doing.

    Type
    Auto-darkening, True Color
    Processes
    MIG/MAG, TIG and MMA
    Amazon reference
    B0DQ3Y6CH8
    EAN
    4262452493496
    • True Color removes the green cast, so the pool and the filler are distinguishable
    • Rated for all three processes, including TIG
    • Switching time and optical class are not published

    Best for: Anyone welding TIG or stainless, where seeing the pool clearly is the whole job

    Search Amazon for this model
  • ESAB Sentinel A60 low-profile welding helmet with a large viewing window

    ESAB 700600860

    Nine stored settings, half-shade steps and the largest published window on this shelf — and a switching time that is slower than a forty-dollar helmet’s.

    Amazon reference
    B0BLQ92744
    EAN
    7330725068591
    • The largest published window here — 4.65 by 2.80 in, about 13 square inches
    • Shade adjustable in 0.5 steps across DIN 3/5-13, with a shade lock
    • A published switching time of 0.08 millisecond is 1/12,500 second — slower, as published, than the 1/23,000 and 1/30,000 figures elsewhere on this shelf

    Best for: A shop that switches process and material all day and wants the settings recalled, not redialled

    ≈ $350
    Check price on Amazon
  • Hobart Inventor auto-darkening welding helmet with a wide viewing window

    Hobart 770890

    Four arc sensors and three analog knobs, from a maker that publishes its viewing area as a single number nobody can square.

    Amazon reference
    B07MKRYWMD
    EAN
    0715959665094
    • Four independent arc sensors, for obstructed and low-amperage work
    • Analog knobs for shade, sensitivity and delay — adjustable with gloves on, unlike a digital button panel
    • The viewing area is published as 9.3 in, with no second dimension — a single figure that cannot describe an area

    Best for: A workshop where settings are changed with gloves on, by feel

    ≈ $130
    Check price on Amazon

Elsewhere in the workroom

  • Hobart 308L stainless steel stick electrodes

    Hobart H481930-RDP, 308L stainless, 3/32 in

    The only stainless rods in this hub — on a listing whose four bullets are a product type, a parcel size, a country and a weight to six decimal places.

    Amazon reference
    B002AKJ23Y
    EAN
    0715959249836
    • The only stainless electrodes in this hub, either half
    • Names the base metals it is for — 304 and 308 stainless — rather than saying "stainless"
    • The four bullets contain no welding specification at all — product type, parcel dimensions, country of origin and parcel weight

    Best for: Repairing 304 or 308 stainless with a stick machine, where no MIG gas is available

    ≈ $11
    Check price on Amazon
  • Hobart 6011 stick electrodes, 1/16 inch, in their one-pound pack

    Hobart H112216-R01, 6011, 1/16 in

    A deep-penetrating 6011 in the smallest diameter on this shelf, stated for welding through light to medium dirt, rust and paint.

    Amazon reference
    B004USV1RE
    EAN
    0715959286619
    • Stated for welding through light to medium dirt, rust and paint — the one job a clean-metal rod cannot do
    • Publishes a tensile strength: 60,000 PSI
    • A cellulosic coating gives a fierce, spattery arc — this is not a rod to learn on

    Best for: Farm and repair work on steel that cannot be cleaned first

    ≈ $16
    Check price on Amazon
  • Fifty-pound sealed steel can of HYW E7018 welding electrodes

    HYW Products E7018, 1/8 in, 50 lb can

    The only low-hydrogen rods in this hub, in the only packaging that keeps them that way — fifty pounds in a sealed steel can.

    Amazon reference
    B07KKY6QSJ
    EAN
    0692769195969
    • Cites the standard it is made to — AWS A5.1-04 — which no other rod in this hub does
    • Supplied in a sealed steel can, which is exactly what this shelf's buying tip says low-hydrogen rods need
    • The highest price in this hub by a wide margin, and a quantity most workshops will not use before the can is opened

    Best for: Structural work where the rod has to be low-hydrogen and dry, in a quantity that justifies a can

    ≈ $190
    Check price on Amazon

All helmets & ppe

Prices quoted in these summaries are dated readings. The live price is shown next to each product.