Control, and aluminum · review
The only machine here that publishes a current range starting at 10 A — and the lightest AC/DC on the page at 9.5 kg (20.9 lb).
Where we come out The most portable AC/DC machine on this page, and the only one that publishes where its arc starts.
Four hundred and sixty dollars, AC/DC, HF start, pulse, spot, 2T/4T — and two figures that separate it from everything above: a current range that starts at 10 A, and a weight of 9.5 kg (20.9 lb).
Every machine on this page reaches roughly 200 A, and that number is limited more by your socket than by the inverter. The interesting figure is the other end. A published minimum of 10 A on TIG means the arc is designed to be stable when it is barely there — which is what you need to weld thin stainless, to fill a pinhole without eating the surrounding metal, or to tack foil-gauge sheet. Machines that publish only a maximum have generally not been engineered for that end of the range.
MMA is quoted separately at 10 to 170 A, which is the honest way to do it: an inverter rarely delivers the same range on both processes.
At 9.5 kg (20.9 lb) it is three kilos lighter than the AC/DC machines of similar output earlier on this page. That is the difference between a bench machine and one you take to the work — up a ladder, into a car, out to a gate. Forced-air cooling comes with it, and it is the one place the specification goes soft: the maker says « high duty cycle » without publishing a percentage or a temperature. We would rather have the number.
VRD, hot start and arc force on the stick side; pulse and spot on the TIG side; HF start throughout. Nothing exotic, all of it useful, all of it published.
Current ranges, processes, modes, MMA features, cooling and weight come from the manufacturer’s published specification. No duty cycle percentage is stated there, and none is invented here. Market availability was verified per market on the EAN.
| TIG current | 10–200 A |
|---|---|
| MMA current | 10–170 A |
| Processes | AC and DC TIG with HF start, MMA |
| Modes | 2T/4T, pulse, spot |
| MMA features | VRD, hot start, arc force |
| Cooling | Forced air — the maker states a high duty cycle without giving a figure |
| Weight | 9.5 kg (20.9 lb) |
| Amazon reference | B0FHQ68F6Z |
| EAN | 4255607924020 |
Because the thin end is where a machine’s limits show. At 20 A you can weld 1 mm (0.04 in) stainless with care; at 10 A you can weld foil-gauge material and fill a pinhole without blowing the edge away. Maximum current is limited by your supply, and almost every machine here reaches 200 A. The bottom of the range is what the manufacturer actually had to engineer.
It changes where the machine lives. Three kilos is the difference between a welder you carry up a ladder or into a car and one that stays on a bench. For repair work away from the workshop — a gate hinge, a bracket on a machine that cannot be moved — it is the specification that decides whether the job happens at all.
7.8/ 10
The most portable AC/DC machine on this page, and the only one that publishes where its arc starts.
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on August 13, 2026.
Thin stainless and aluminum, and anyone who has to carry the machine upstairs
Here because the consumable states this machine by name.
Specifications: the manufacturer sheet for welding and metalworking machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
180 A AC/DC · 32-bit control · 7-year warranty · €380
A fully digital AC/DC machine with adjustable pulse, from an importer that publishes an address and a seven-year term.
Best for: Someone who wants aluminum capability and an importer who answers letters
200 A AC/DC · fully digital · 7-year warranty · €570
The top of this page: a fully digital 200 A AC/DC machine with stick as well, and seven years behind it.
Best for: Regular aluminum and stainless work, where the machine has to be right rather than adequate
200 A AC/DC · AC frequency 20–100 Hz · spot 0.01–9.99 s · €459
The first machine on this page that publishes its AC frequency range and pulse frequencies — the controls aluminum actually needs.
Best for: Aluminum work where the arc has to be steered, not just switched on
Prices quoted in these summaries are dated readings. The live price is shown next to each product.
